Entering the same SSID and the same security profile (eg.: WPA2/AES). Connect one WLAN to the RB4011 with setting as 'station bridge'. (It would conflict with the DHCP-server of the RB4011) No other services should be on the bridge or interfaces. That IP config is only used for managing the hAP ac2. the bridge can have a DHCP-client defined to get an IP address, route and DNS from the RB4011. Or you can just delete all firewall rules and NAT rules.)

All ports on the hAP ac2 are LAN, never WAN. (IF the default Home AP firewall is still there, the bridge must be part of the LAN 'interface list'. one bridge, bridge all interfaces of the hAP ac2 to that bridge. The hAp ac2 setup has the following components. Other clients can connect to the RB4011 as before. That 'station bridge' is just another client to the AP-bridge. 2.4GHz traverses walls a bit better but is slower than 5 GHz. Which WLAN you use for that connection depends on the speed and distance you have to cover. To do that the interface must have the same SSID and the same security profile as the AP-bridge it connects to. The basic functionality we need is one WLAN on the hAP ac2 as 'station bridge' to connect to the RB4011.

The hAP ac2 will be set up as a very simple switch (network terminology, layer 2 domain switching, no higher layer functionality.) extending the LAN side of the RB4011, and as such extending the range.įorget WDS, forget mesh. Both WLAN interfaces are set as 'AP bridge', with frequency (channel) set for optimal working. The RB4011 is set as your router with all the functions needed as if it was stand-alone.

How to setup mesh wifi